now on the 3rd set while still on the disc side go ahead and drop 8 spokes in from the backside of the hub flange so that the spoke heads are facing inward. Flip the wheel over and fan out the spokes. Starting with the very 1st spoke from the 1st set count over 8 spokes and this will be your 1st spoke for the 3rd set .Wind the hub up clockwise and run the 1st spoke of the 3rd set over/over/ and under the crossing spokes and place it into the 2nd eyelet to the left of the valve hole (see pic #2). Run the other seven spokes.
No comments:
Post a Comment